- The container is removable without the use of tools from any vehicle other than those specified below:
- fork lift trucks;
- vehicles which do not use LPG/NGV or CNG as a means of propulsion;
- diesel engine enhancement systems;
1. The container has:
- advanced corrosion or fire damage;
- cuts or dents which penetrate the surface of the container;
- any dent on the container which is deeper than 10% of the width of the dent, or which is located on a weld and exceeds 6.5mm in depth;
- any dent or crease on the container which is longer than 75mm;
1. the statutory life of the container has expired.
NOTE: It is a statutory requirement for an LPG/NGV/CNG container to be checked for continued service life:
- LPG every ten years
- NGV steel containers every five years
- CNG steel containers every five years
- fibreglass reinforced plastic (frp) containers every three years
- the boot lid torsion bars, coil springs or hinges contact the container;
- the container and its surface mounted fittings are not protected from damage by vehicle component (e.g. tail shaft) failure;
- where mounted within a cargo space the container is not protected from impact from cargo or other objects carried in that area, i.e. it is not installed within an enclosed protective compartment;
- the container or its gas carrying components are located within 150mm of a heat source and there is no heat shield;
NOTE: This may be reduced to 40mm if the shield is more than 15mm from a gas carrying component.
- the container is incorrectly aligned so that it impedes access to the container service valve;
- the container is incorrectly aligned so that it impairs the operation of the ullage valve or the automatic fill limiter (AFL);
- Where containers installed on or after 1 July 1988 have a wall thickness marked to be less than 2.2mm:
- the container is not installed within a protective compartment;
- the container is located less than 75mm from the side panels of the vehicle;
- the container is not marked "This vessel shall be installed within a compartment inside the vehicle".